CENSE Book a free facility review
All projects

Humidity control for a 50,000 m³ high-bay warehouse

  • HVAC systems
  • Black utilities & energy
  • 50,000 m³
  • 15–25 °C
  • 3 × 20,000 m³/h
  • 2+1 redundancy
High-bay pallet racking in a warehouse, eight levels high
On site: the high-bay warehouse, about 90 × 46 × 12.5 m.

The challenge

A temperature-controlled high-bay warehouse struggles to stay within its 15 to 25 °C specification. The client also wants the installation to hold relative humidity between 35 and 65 %, but the existing system has no way to add or remove moisture.

What we did

We reviewed the existing installation and analysed a full year of its trend data. Then we let the psychrometrics settle the question. Outdoor air warmed to 20 °C in winter ends up at 10 to 34 % RH. Cooled to 20 °C in summer, it sits at 79 to 90 %. Neither lands in the band, so it can only be held with active humidification and dehumidification.

Outdoor air brought to 20 °C, against the required band

0 % RH100 % RH

We compared three concepts and worked the preferred one out to a cost estimate.

The result

  • The existing air handling units renewed as three units of 20,000 m³/h in a redundant 2+1 configuration. The warehouse stores critical products, so it stays in specification with one unit out of service.
  • The existing jet-duct network re-used.
  • Permanent mapping sensors in the racks, so temperature and humidity are followed across the whole volume, not at a single point.
  • A phased approach, worked out around the client's operations so the warehouse keeps running during the works.
Next projectGowning rooms brought back into compliance